Wednesday, September 19, 2012

Used Band Saw - How to Get the Best Deal inherent

A used band saw is a great way to get access to a extremely efficient cutting tool at a bargain. However, if you don't know what you are doing then you can assuredly get ripped off. In this article, I'll tell you what to look for and how to get this piece of equipment for a cheap price.

What Are You Cutting?

Band Saws Woodworking Tools

You need a different type of band saw depending on either you are only going to cut wood or also need to cut metal.

Used Band Saw - How to Get the Best Deal inherent

Best Price Olson Bandsaw Blade 93-1/2" All Pro Assortment Pack


Olson Bandsaw Blade 93-1/2" All Pro Assortment Pack Feature

  • 3-pack assortment of 93-1/2" long blades for 14" bandsaws
  • Super hard edge
  • Use with hard/soft wood, exotic hardwoods
  • For all vertical/stationary two-wheel bandsaws
  • Durable, controllable, tough, and shock resistant

Olson Bandsaw Blade 93-1/2" All Pro Assortment Pack Overview

This assortment pack of Olson All Pro Bandsaw Blades includes three of the most popular 93-1/2" long blades for 14" bandsaws: 3/16" 10 TPI; 1/4" 6 TPI; and 5/8" 3 TPI. All Pro blades have a tooth hardness of Rc 62-64, with a tempered back to aid stiffness and increase cut accuracy. Raker set teeth (every third tooth is unset) are best suited to cutting wood, plastic and nonferrous metal. The blades are designed for heavy-duty use in furniture manufacturing, as well as fine woodworking and craft work. Blade formulation contains pinpoint carbides, molybdenum, chrome and silicon, with a molecular structure that gives great metallurgical consistency for superior welds and sharpness retention.

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Sep 19, 2012 15:30:14

If you don't need to cut metal or you can do so via other means then I extremely recommend getting a quarterly wood band saw. It will be economy and take up less space.

Spares

A band saw has a few replaceable parts that need changing from time to time as they wear out or otherwise degrade. The chief component in this regard is the cutting blade.

But if you buy an old band saw that is no longer supported by the builder then you will not get much use out of it and will have to throw the engine away when it no longer cuts very well!

Look for one of the major brands such as Black & Decker, Grizzly, Milwaukee, Jet, DeWalt, Hitachi and Ryobi. These will be supported for many years.

Delivery Costs

Band saws are very heavy. Try to get the band saw by car if you can. Otherwise you will have to shell out a lot of dough.

Stick To The Specialists

Online auction sites like eBay are very good if you are seeing for spare parts like blades and guides but it is much more of a minefield if you are seeing for a used band saw (not to mention the cost of delivery).

I recommend avoiding these sites and sticking to scholar stores. You will be able to walk in and see a collection of models. Each will be reconditioned to full working order and come with a parts and labour guarantee. Shipping (if you need it) will also be affordable.

Most cities have at least one store that specialises in used machinery.

Used Band Saw - How to Get the Best Deal inherent

See Also : Band Saws Woodworking Tools home improvement Saw Accessories

Sunday, September 16, 2012

Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch

Best Price Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch


Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch Feature

  • 24 TPI, Bi-Metal Construction (3 pack)
  • Matrix II high speed steel teeth with 8% cobalt
  • For cutting stock up to 5/32 in. thick
  • For use with portable band saws using 44-7/8 in. x 1/2 in. x .020 in. blades
  • Limited warranty

Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch Overview

Includes 24T Band Saw Blade 3PK bo - 48-39-0531

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Sep 16, 2012 04:15:03

Thanks To : Band Saws Woodworking Tools home improvement Bench Grinders

Friday, September 14, 2012

Woodworking - You Can Do a Lot of Things With a Band Saw

Woodworking businesses have now become the in-thing today. Art and art works are in ask in today's store because they make good souvenirs, giveaways and home or office decorations giving way for wood workers to make a good earnings out of it. With this, a power tool such as a horizontal band saw would make a perfect tool to make sure that productivity and ability will be well taken cared of.

If you are into wood carving but you are still manufacture patterns for your wood task manually, it is time that you should reconsider owning a good ability band saw that is not that hard to operate.

Band Saws Woodworking Tools

Wood carving is a nice pastime but you can also make good earnings out of it. In fact, there are habitancy who also earn passive earnings by showing writing about their woodworking enterprise online and sharing some of their wood working processes.

Woodworking - You Can Do a Lot of Things With a Band Saw

Best Price Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch


Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch Feature

  • 24 TPI, Bi-Metal Construction (3 pack)
  • Matrix II high speed steel teeth with 8% cobalt
  • For cutting stock up to 5/32 in. thick
  • For use with portable band saws using 44-7/8 in. x 1/2 in. x .020 in. blades
  • Limited warranty

Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth per Inch 44-7/8-Inch Overview

Includes 24T Band Saw Blade 3PK bo - 48-39-0531

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Sep 15, 2012 01:15:11

Once you are contemplating doing things for enterprise and you are already getting a lot of orders, it is all the more practical to get yourself a ability saw to help you with the cutting of the patterns with good art and precision. Aside from that, you need this tool to help you close your projects a whole lot faster than when you have to do it manually. With many businesses, time is obviously important. Usually, your customers cannot afford to wait longer for their orders. Therefore, investing on band saws is the best thing that you can spend for the business.

It takes practice and skills to learn how to control a band saw. Just remember, though, that saws of this type use sharp blades for cutting wood; so you need to make sure that you are using this power tool with some caution and care. You don't want to end up cutting or losing some of your fingers from it. Before you try using such a saw, like the horizontal band saw, make sure that you have understood everything that's written on the by hand that comes with your purchase.

Woodworking - You Can Do a Lot of Things With a Band Saw

Thanks To : Band Saws Woodworking Tools Air Compressors Blades Accessories

Friday, August 31, 2012

A Tourist's Guide to the Natural Sights of Oregon

Nature, the renowned element colse to which life in Oregon revolves, results in the state's topographical diversity and rugged, natural beauty, and dictates the experiences the tourist is likely to have.

The 362 mile long coast, for instance, comprised of rain forests, sand dunes, black sand beaches, and unique rock formations, is splintered by some dozen rivers, which flow into the Pacific. The spine of the Coast Range and the Klamath Mountains provides a westerly skeleton, while the Columbia River defines the border in the middle of Washington and Oregon in the north. The Cascade Mountains, black basalt formations densely carpeted with thick, green forests and capped with snow covered volcanoes, cradle alpine lakes and a national park, and increase form Mt. Hood in the north to Hayden Mountain in the south, serving to separate the western half of the state with its central high desert plateau. In the northeast, the 10,000-foot Wallowa Mountains invert themselves into 6,600-foot-deep Hells Canyon, the world's deepest river carved gorge.

Band Saws Woodworking Tools

Abundant vineyards produce an array of exquisite wines, while locally grown marrion berries shape in Oregon cooking, along with the bounty of the land's fruits and vegetables and the rivers' salmon.

A Tourist's Guide to the Natural Sights of Oregon

Best Price JET JWBS-14DXPR 14-Inch Deluxe Pro Band Saw Kit


JET JWBS-14DXPR 14-Inch Deluxe Pro Band Saw Kit Feature

  • Built-in 12-Inch resaw capacity for cutting larger pieces of wood
  • 2 Speed poly-v belt drive system
  • Newly designed upper and lower cast iron frame for increased strength and rigidity
  • Easy to view blade tracking window
  • Blade guide post with rack and pinion adjustment

JET JWBS-14DXPR 14-Inch Deluxe Pro Band Saw Kit Overview

The JET 14in. Deluxe Band Saw (shown with optional fence) is designed to meet the needs of today's most demanding woodworkers. There is no need to add a riser block; this 14in. band saw comes with a massive cast iron frame for increased power that makes it ready to meet all resaw applications head-on. Couple this incredible feature with a new high tension spring design and many more amazing features, and you have a band saw that will last for years to come. Cutting Capacity (SFPM): 1,500/3,000, Volts: 115/230, Stand Included: Yes, Cutting Depth at 90deg (in.): 12, Cutting Angles: 10 left, 45 right, Variable Speed: No, Blade Size L x W x Thickness (in.): 93-105 x 1/8-3/4, Dimensions L x W x H (in.): 29 x 28 x 77, HP: 1 1/4, Cutting Capacity - Flat Stock (in. x in.): 13 1/2 x 12

JET JWBS-14DXPR 14-Inch Deluxe Pro Band Saw Kit Specifications

Boasting updated, innovative features that provide reliable precision while rendering the riser block obsolete, the JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw Kit from Jet tackles even the toughest resawing jobs measuring up to 12 inches. A host of helpful details, including a high tension spring design, gives you more power and control for clean, accurate cuts, and sturdy construction ensures optimum durability for long-term use.


The JET JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw Kit offers:
  • Cutting capacity width of 13.5 inches and cutting capacity height of 12 inches
  • A versatile, built-in retractable blade guard
  • A 15 x 15-inch work table that tilts 10 degrees left and 45 degrees right
  • A tough cast iron frame for durability and stability





This tool features sturdy, dependable construction and built-in storage space.


The JWBS-14DXPRO offers power, versatility, and durability. View larger.


Quick-release blade tension ensures fast adjustments.


Blade guides offer superb precision with every cut.


A dust port helps keep your workshop clean.
High Cutting Capacity and Built-in Retractable Blade Guard for Versatility
To power through material of various sizes, this band saw offers a cutting capacity width of 13.5 inches and cutting capacity height of 12 inches. It also offers a built-in retractable blade guard that moves up and down from zero to 12 inches, so you have the versatility to work with both smaller and larger work pieces.

Cast Iron Frame for Powerful Performance
With its massive, super-tough cast iron frame, and a blade speed of 1500/3000 SFPM, the JWBS-14DXPRO packs a powerful punch to cut through material quickly and easily. The rigidity of this newly redesigned frame also allows for even the toughest resawing jobs and saves you the hassle of using a riser block.

Sturdy Table for a Wide Range of Projects
Thanks to its sturdy, 15 x 15-inch work table that's designed to tilt 10 degrees left and 45 degrees right, the JWBS-14DXPRO gives you the flexibility to meet the unique demands of each project. And with a height of 43.5 inches, the table ensures you can meet a range of woodworking jobs head-on.

Upper and Lower Ball Bearing Guides for Reduced Friction
The JWBS-14DXPRO's redesigned features lend incredible durability. Most significantly, upper and lower ball bearing guides help to reduce friction, which enhances blade performance and translates into longer blade life.

A Range of Features for Precision and Safety
An efficient poly-v belt drive system provides more precise results while giving you the choice of two speeds for better control. Additionally, a convenient quick release blade tension ensures flexibility and fast, effortless adjustments. There's also a blade guide post with rack and pinion adjustment for better accuracy, and an efficient high tension spring design for consistently powerful performance even after repetitive and long-term use.

Easy-View Window and Blade Guide Post for Safety
Safety is of utmost importance when working with spinning blades. That's why the JWBS-14DXPRO includes an easy-to-view blade tracking window. With this handy feature, you're always aware of the blade's position as you work.

Enclosed Stand for Better Organization
This band saw helps you keep track of materials and reduce clutter in your shop by featuring an enclosed stand with a handy storage shelf. There's also an easy-access door so you can quickly grab what you need and get back to work.

The JWBS-14DXPRO is backed by a five-year warranty.

About JET: A History of Sharing New, Feature-Rich Products
Opened in 1958 after the founder of the company, Leslie P. Sussman, took the first Boeing Jet Airplane trip from Seattle, Washington to Japan, JET began as a small dealer that sold air hoists and trolleys out of a single hardware store in Seattle. Over the years, JET has carried everything from snowmobiles, transmitter radios, and forklifts to nylon stockings, but by the early 1970s, metalworking had become the base of their business line. And by the 1980s, JET had expanded into the realm of woodworking. Today, you'll find that JET offers a wide range of popular woodworking tools that are backed with best-in-class features and excellent service.

What's in the Box
JWBS-14DXPRO 14-Inch Deluxe Pro Band Saw, base, trunnion, table, and instructions

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Aug 31, 2012 17:00:07

Columbia River Gorge

Formed by volcanic operation and both basalt lava and glacial floods, the Columbia River Gorge National Scenic Area, spanning 80 miles from Troutdale in the west to the Dalles in the east, and encompassing 292,000 acres on both the Washington and Oregon sides, had been created by Congress in 1986. The Columbia River itself, at 1,243 miles in length, is the second largest such artery in the continental United States and the only nearly sea level passage through the mountain range stretching in the middle of Canada and Mexico. Originating in British Columbia, it flows through the mountains, before turning south and finally west where it releases 250,000 cubic feet of water per second into the Pacific. Topographically featuring Douglas fir, hemlock, and western red cedar in the west, the gorge transforms into drier pine forest and grassland in the east.

Its primary Native American residents, the "Watlala," who had been more commonly known as the "Cascades," had lived on both sides of the river in the middle of Cascade Locks and Sandy River, using it for sustenance and trade by fishing for salmon, steelhead, sturgeon, and eel. The land provided berries and roots and the colse to mountains facilitated hunting for deer and elk. Living in structures made of cedar planks, the Watlala seasonally traveled down the river to fish and collect plant foods, such as "wapato" and "camas," in cedar carved canoes, while wood and mountain sheep horns had provided the raw materials for tools, bowls, and pots. Wrap twined baskets sported intricate decorations of nature, people, and animals.

Controlling the portage round Cascade Falls, which had been too treacherous for canoe or boat passage, they collected tolls in the form of traded goods in transfer for access.

The Watlala signed Willamette Valley Treaty ceded their southern bank of the Columbia River to the Us in 1855, and they had subsequently been relocated to the Grand Ronde Indian Reservation two years later.

Of the gorge's numerous waterfalls, Multnomah Falls, plummeting almost 620 feet from its origin on Larch Mountain, constitutes the second-highest year-round waterfall in the Us. "Multnomah," translating as "those closer to the water," with "water" referring to the Columbia River itself, cascades down a cliff in which five flows of Yakima basalt are visible, and its spray, icy in early-winter and melting in late-spring, causes the rock over which it travels to crack and break away. The falls are accessed by some hiking trails.

The adjacent, Cascadian style, natural stone Multnomah Falls Lodge, designed by architect Albert E. Doyle in 1925 to serve travelers arriving by car, train, or steamboat, sits on land donated by the Oregon and Washington railroad and navigation company to the city of Portland. The lodge's east end, which includes the later added Forest aid Visitor's center in 1929, had preceded its post war remodeling and 1946 reopening. On April 22, 1981, the lodge, along with the first 1.1 miles of its Larch Mountain trail, had been placed on the National Register of Historic Places, and the day facility sports two second floor, fireplace and stone dining rooms overlooking the falls and the Columbia River. An allinclusive gift shop is placed on the main level.

The Columbia River Interpretive Center, placed over the Columbia River spanned, erector set appearing Bridge of the Gods in Stevenson, Washington, provides snapshots of life in the area in a modern, two level museum, with exhibits such as a horse drawn buckboard from 1890, a wooden fish wheel, a 1921 log carrying Mack truck, an 1895 Corliss steam machine used to drive saw carriages and conveyors in a Cascade Locks lumber mill, hand crafted canoes, and a 1917 Curtiss Jn-4 Jenny biplane, which had facilitated local transportation.

Further east, and back on the Oregon side, the Columbia Gorge Hotel, built on a scenic cliff overlooking the Columbia River, is a stately, neo-Morish structure listed on the National Register of Historic Places by the Us department of Interior unofficially dubbed the "Waldorff of the West." Constructed in 1921 by timber tycoon Simon Benson as a tribute to America's post-war prosperity, it had hosted public and political dignitaries, presidents such as Coolidge and Roosevelt, movie stars like Clara Bow and Rudolph Valentino, and musicians from the Big Bands, having played an integral role during the Roaring Twenties when Model T Fords had traveled the roads and steamers had plied the rivers. Voted one of the world's top 500 hotels by Conde Nast magazine, the hotel, sitting on meticulously manicured, tiny waterfall dotted grounds, features an elegant, chandelier and fireplace adorned lobby and restaurant.

The Mount Hood Railroad, placed a short length from the hotel, traces its origins to 1905 when Utah lumberman David Eccles laid track in order to vehicle timber in the middle of the forest and his lumber mill by a steam machine powered logging train, and today offers daily excursions along the 8.5 mile stretch in the middle of Hood River and Odell through predominantly forested and fruit orchard topography and less frequent runs the full 22 miles to Parkdale, gateway to Mt. Hood.

Mt. Hood

Mt. Hood, named after British admiral Samuel Hood in 1792 and part of the Cascade Mountains, is an inactive volcano whose last, although minor, eruption, occurred in the middle of 1845 and 1865. At 11,235 feet, it is Oregon's tallest peak. Glacier and river sculpted over the years, the snow covered mountain, rising above Trillum Lake, features a 50-degree slope at its last, 2,000 foot rise, and offers year round hiking and skiing.

Its story, however, is every bit that of the lodge designated "Timberline" and nestled on its south slope at the 6,000 foot level. The consequent of the Works improve management (Wpa), the federal department created in 1933 to supply gainful employment to Americans who had been rendered idle by the Great Depression, it had been constructed by a predominantly inexperienced workforce which had used natural, Oregon indigenous material.

Its introductory site survey, made in the spring of 1936 under 14 foot snow accumulations and only accessible by a primitive road which concluded a half mile from the actual location, yielded to the first drawings and subsequent groundbreaking on June 11 of a European chateau and alpine style lodge designed by Gilbert Stanley Underwood and constructed entirely of gray, almost rock-resembling wood whose roof line echoed that of the steep mountain slope behind it.

Oregon had provided its foundation in the literal sense by supplying the mountain it had been built on and the natural materials which had been severed from their wombs and reduced to the individual structure blocks which had been intricately reassembled into the lodge itself, inclusive of the forest supplied wood for its surface structure and interior furniture and carvings, and the mountainside- and quarry yielding andesite stone for its walls and fireplaces.

Featuring a hexagonal core known as the "head house," which had been inspired by the shape of the mountain peak behind it, and a single, angled wing extending from whether of its sides, it had been designed as an prolongation of, as opposed to obstruction to, its surroundings.

Completed in only a 15 month period, it had been dedicated by President Franklin D. Roosevelt on September 28, 1937 and opened to the public the following February.

The hexagonally shaped head house, subdivided into the lower lobby, upper lobby, and mezzanine, features a truncated, 55 foot high "timberline" arch supported by carved sides and a top crossbeam, in the center of which is a six sided stone chimney which sports three, railroad track andiron adorned fireplaces. Hexagonal ponderosa pine columns, each weighing seven tons and milled from a single tree, surround the lodge, while Oregon white oak provides its floor planks. The hexagonal pattern is repeated in the hand forged wrought iron chandeliers and floor lamps, and floor to ceiling windows (attempt to) supply views through the 21 foot high snow banks. Some 820 pieces of wooden, hand crafted furnishings and carvings were made in the Wpa woodworking shop in Portland.

The Cascade Dining Room, placed off the main lobby and thresholded by wrought iron gates made in the Wpa blacksmith shop, exudes rustic, early-1900s elegance with a polished, wooden floor; a wood beamed ceiling; a relief carving adorned stone fireplace entitled "Forest Scene," and a bar.

Guest rooms, varying in size and appointment from bunk beds to fireplace suites, are rustic with heavy wooden doors; wrought iron latches; leather-and-iron lamps; heavy, wooden beds; and knotty pine panelings.

Timberline Lodge, the only public construction of its size constructed entirely by hand with primary craft work in wood, wrought iron, mosaic, painting, and carved linoleum, and, since 1978, a National Historic Landmark, is every bit a "sight" as an overnight lodge. It serves some two million each year visitors, only a small division of whom are legitimately skiers.

Returning to a roaring fire which castes warmth and light into the wooden lobby from its central stone fireplace after a day of skiing and enjoying award winning cuisine in the rustically elegant Cascade Dining Room, and then cacooning oneself in quilts in a knotty pine paneled guest room on the other side of whose wall the half, snow-buried pine trees surround the base of Mount Hood whose jagged, black granite, snow blanketed peak is periodically shrouded in cloud and mist throughout the night, is a quintessential Oregon experience.

Central Oregon

Because the Cascade Mountains mostly drain primary storm fronts of their moisture, and therefore supply safe bet climactic zones on whether of their sides, Central Oregon, to the east of them, forms a high desert plateau and enjoys 300 days of sunshine, as contrasted with the rain drenched coast. Access is via winding, ascending Route 20 through the dense, needle thin ponderosa and lodgepole pine of Willamette National Forest, over Tombstone and Santiam Passes, and finally through Deschutes National Forest, all of which are often shrouded in low-altitude cloud, and lead to an area of snow capped mountains, 150 mountain lakes, and 500 miles of rivers. They afford a variety of recreational opportunities, together with golfing, fishing, biking, horseback riding, hiking, climbing, rafting, and skiing. Bend, an accommodations base and once a booming timber town, capitalizes on the area's attractions with hotels, resorts, restaurants, and services. The area is alternatively served by colse to Redmond Airport.

Sisters, one of Central Oregon's attractions, is a quintessential western town of about 1,000 with 1880s style storefronts and wooden boardwalks named after the Three Sisters Mountains in the southwest. Initially accessed by trails forged through the Santiam Pass to the high desert by those hoping to strike it rich in the gold mines of Eastern Oregon and Idaho, it had developed into a small town after the trails had evolved into wagon roads. Wood from the surrounding pine forests had established lumber as its principle economic activity, although tourism plays an increasingly leading role. Bronco Billy's Saloon, built in 1912, is an historically leading construction in Sisters.

The High Desert Museum, placed a few miles south of Bend on Highway 97, is a modern, continually increasing facility which showcases the wildlife and landscapes of eight western states in both indoor and outdoor exhibits, together with those of western exploration and settlement, the Columbia River plateau Indians, a "desertarium," an 1880 homestead ranch, a working sawmill, and a raptor center.

The area's geology can be studied in colse to Newberry National Volcanic Monument. One of the largest "shield"-shaped volcanoes in the Lower 48 states and placed along the Northwest Rift zone of faults, the 500 quadrate mile Newberry Caldera, whose most new eruption, the Big Obsidian Flow, occurred 1,300 years ago, cradles two trout and salmon abundant lakes: Paulina Lake, at 250 feet one of Oregon's deepest, and 180-foot-deep East Lake, are both fed by hot springs below them. Once believed to have existed as single entities, Paulina and East Lakes had been divided by pumice and water deposits 6,200 years ago.

Paulina Peak, the crater's top at 7,985 feet, provides views of the High Desert plateau and the Cascade Mountains.

The Deschutes River, a federally designated Wild and Scenic River, flows through the monument's northwest corner, and offers fishing, kayaking, and white water rafting, while more than 100 miles of trails, interspersing the monument, facilitate hiking, mountain biking, horseback riding, skiing, and snowmobiling. Area wildlife includes deer, elk, black bear, ducks, osprey, geese, tundra swans, and bald eagles.

Aside from the caldera, three separate areas can be visited.

The Lava Lands Visitor Center, the first of these, depicts Central Oregon's geology, archaeology, history, and fauna. Ranger-led interpretive hikes take visitors through the volcanic landscape. 500 foot high Lava Butte, whose crater had been formed 7,000 years ago when it had erupted and spewed lava over a nine quadrate mile area, is accessible by a perimeter road and affords views of the Newberry Volcano and Cascade Mountain Range.

The Lava River Cave, a one mile long lava tube, had been created when a river of molten lava had formed a channel whose sides hardened, creating a roof, but the hot lava had prolonged to flow through the tube, leaving it hollow. Its interior climatic characteristic is now a constant 42 degrees Fahrenheit.

Finally, the Lava Cast Forest had been created when Newberry Volcano vent originating lava had flowed through a little ponderosa pine forest, enveloping the trees and forming molds round their now burned bases when they had cooled. A one mile trail leads through the forest, which is being progressively reclaimed by young pines.

Aviation-Related Northwest Oregon

Northwest Oregon features two requisite sights, which not only center round aviation, but also withhold the state's nature oriented theme.

The Evergreen Aviation and Space Museum, the first of these, had been created by Delford M Smith, founder of Evergreen International Aviation, and his son, Captain Michael King Smith, who had served as Second Lieutenant in the Us Air Force and had been an F-15 Fighter pilot and the head of the 123rd Fighter Squadron of the Oregon Air National Guard. Centerpiece of the museum's three modern, A-frame, aviation, space, and Imax buildings, placed in McMinnville, is the Hughes H-4 Hercules, the world's largest vehicle flying boat, designed and built by the Hughes Aircraft company entirely of natural, laminated birch wood due to World War Ii-imposed metal usage restrictions and hence given the unofficial nickname of "Spruce Goose."

Designed to fulfill the 1942 Us department of War requirement for a very large aircraft to vehicle personnel and war material over the Atlantic where aircraft had hitherto been frequent targets of German U-boats, it had originally been intended as one of three stipulated by the contract, which had dictated a two-year amelioration period. Powered by eight, 3,000 hp Pratt and Whitney Wasp Major radial engines, the H-4, with a 218.8 foot allinclusive length and a 319.11 foot wingspan, accommodated 750 fully adequate soldiery in its cavernous, dual deck fuselage and had a 400,000 pound maximum take off weight. The only airframe ever completed, and thus serving as the prototype, it had first flown on November 2, 1947 when Howard Hughes himself had covered less than a mile at a 70 foot altitude while maintaining a 135 mph air speed. It became its only flight.

The museum retains its natural theme by cultivating its own vineyard in front of it appropriately named "Spruce Goose Vineyards," and a wine tasting room and gift shop, where one can sample the wines of the area's abundant other vineyards, is placed in the aviation building.

The second aviation connected sight, the Tillamook Air Museum, is placed on the Oregon coast and is accessed by Route 6, which curves through Tillamook State Forest's dense, multiply shaded pine and pinnacles at the 1,586-foot summit of the Coast range. One of 17 Us Navy, coastline constructed hangars to house K class blimps used for antisubmarine coast patrol and convey escort, the 1,072 foot long, 296 foot wide hangar, made entirely of wood due, again, to war restricted metal use, had been commissioned in December of 1942 at Naval Air hub Tillamook to serve the Oregon/Washington corridor.

Of the two hangars constructed here, Hangar B had been the first to have been completed in the spring of 1943, followed one month later by Hangar A. Housing Squadron Zp-33's eight K ships, it features six, 30 ton, railroad track guided door sections surface the 120 foot high, 220 foot wide occasion which thresholds the 15 story high, seven acre internal space. The 251 foot blimps, attaining lift with 425,000 cubic foot helium bags, could remain aloft for three days and cover 2,000 miles.

After the air hub had been decommissioned in 1948, the two hangars had been used for some purposes, together with those of hay bail storage, and the material in Hangar A had inexplicably sparked and ignited in 1992, destroying it. Two years later, Hangar B had been developed into the current, nationally historic aviation museum displaying a vintage variety of restored, exclusively flyable aircraft.

Here, wood, the natural element of Oregon's forests, had been used to build the hangars in which dirigibles, using the natural gas of helium to attain lift, had been stored, in an ultimate act of history preserving history, and of nature serving man, which is, in essence, the story of Oregon.

A Tourist's Guide to the Natural Sights of Oregon

My Links : Band Saws Woodworking Tools home improvement Jigs Accessories Rotary Tool Accessories Router Accessories

Thursday, August 30, 2012

Setting Up Shop - Stationary Power Tools

In this report we're going to talk about the big guns; the tools that you see in all the Tv shows and all the pictures of "serious" woodworking shops. I'm going to go though the list of stationary power tools that I think make up a basic shop. Again, if you're just beginning out in woodworking and you're not sure exactly what kind of woodworking you want to do, don't go out and empty your savings list buying all these tools. The best suggest that I got when I first started woodworking was, "buy tools as you need them". Tool associates do a great job development you think you couldn't perhaps build anyone without their most recent and many tool. Talk to other woodworkers, join a woodworking guild in your area, visit on-line conference groups on woodworking, (the best known is rec.woodworking), and see what others are saying about tools you're considering purchasing.

All the power tools that I'm about to mention have less expenses tools that will do the same job. So why do we even need these bigger more high-priced stationary power tools? Speed, durability, and repeatable accuracy. Stationary power tools are built to do clear tasks faster, there built to do that same task over and over again, and they are built to cut wood as literal, on the first piece you send through them as the last piece. Let's take a look at our list.

Band Saws Woodworking Tools

Table saws: The first motor you'll probably want to spend in is a table saw. The table saw is the center piece for most shops. If you plan on building cabinets, furniture, doing home mend and remodeling, instrument building, architectural millwork, boat building, etc, this will be your workhorse. Buy the best you can afford. You need one that's has a flat table top, has a fence that's parallel to the blade, can accept a 3/4" dado blade, and the arbor that the blade goes on needs to be parallel to the miter gage slot (or at least be adjustable). The whole the fence can move away from the blade will resolve how big a piece of wood the saw can cut. If you plan on cutting a lot of sheet goods (plywood) get at least a 50" fence.

Setting Up Shop - Stationary Power Tools

Best Price Kreg KMS7200 Bandsaw Fence


Kreg KMS7200 Bandsaw Fence Feature

  • Precision lens cursor for pinpoint accuracy
  • Incredibly strong and rigid for optimal durability and tighter workpieces
  • Easy to attach and remove for less downtime and more productivity
  • Adjustable in two dimensions for setting parallel with the blade
  • Fits most 14-inch band saws for versatility

Kreg KMS7200 Bandsaw Fence Overview

Introduce a new level of accuracy to your band saw with the Kreg Precision Band Saw Fence. Designed by woodworkers, for woodworkers, it offers an unprecedented level of rigidity, adjustability, and precision. The fence is adjustable in two dimensions for ease in setting it parallel to the blade. Cutting accuracy and repeatability is further enhanced by the precision lens curser that reads off of the included scale. Mounts to most 14 inch band saws including Jet, Delta, General, Grizzly, and many others.

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Aug 30, 2012 11:15:05

There are three major types of table saws: Bench top, undertaker of a package deal style and Cabinet style. Bench top saws simply aren't stationary tools but I wanted to consist of them in this list because they have come a long way in the past any years. This saws used to be small and somewhat risky to use. any manufactures have put beefier, safer, more portable, with larger cutting capacity than ever before. That being said I would still caution against buying one of this saws as a stationary tool in your shop. however if you need something that you can take with you to a job site, then this is the way to go.

Contractor saws are stationary tools. They typically have an open base with the motor hanging out the back. Unlike bench top saws, undertaker of a package deal saws are belt driven so they're much quite. The better ones all have the things I mentioned early to look for in a potential table saw. I didn't mention this in my list of types of table saws early, but some manufactures have developed "hybrid" saws that have attributes of both undertaker of a package deal saws and our next style, the cabinet saw. The price incompatibility between a hybrid saw and a cabinet saw isn't much, so I would buy a undertaker of a package deal or go ahead and make the jump to a cabinet saw. A cabinet saw is the "Big Daddy" of table saws. They're heavier, which cuts down on vibration, the trunnions are beefier, they're wired for 220 volts, the base is enclosed which gives them good dust collection, and they have more suited motors (usually 3 to 5 horsepower) to slice through thick, tough woods. Most professionals and hobbyist that deal with thick pieces of hardwood opt for the
cabinet saw.

Thickness Planer: A thickness planer does exactly what its name implies, it cuts down a piece
of lumber to a desired thickness. Most rough cut lumber is right off the sawmill which means the thickness ordinarily varies along it's whole length. If you buy a 4/4" (1") board from the sawmill and you need it's terminated thickness to be 3/4" you will have to either use a hand plane or the thickness planer to get there. Hand planes will do the job, but if you have any boards to thickness you'll appreciate how fast and literal, a thickness planes can get the job done. Thickness planers come in movable or stationary machines. movable may be stretching it for some planers, some are close to a hundred pounds! Most hobbyist and a lot of professionals opt for the movable planers. Most of these planers have a 12" capacity which is ordinarily adequate for most pieces of wood you'll come across. A good planer will have a flat table that's adjustable, a easy to read depth scale, easy to get to and turn blades, and good dust collection. The
stationary thickness planers offer all these traits while being heavier, beefier, and contribution a larger
width capacity, from 15" on up.

Jointer: Putting pieces of wood together is easier and much more predictable if you are dealing
with straight, flat lumber. Many population assume that they don't need a jointer if they have a thickness planer. What they don't understand is that a thickness planer doesn't flatten a board, it only makes it a uniform thickness. If you put a bowed board through a thickness planer you'll get a bowed board when it comes out. The jointer first makes the board flat on one side. It does this by having two flat tables one on each side of a spinning blade. The board is pushed over the blade that is set to take off a clear amount, say 1/32". The other table on the opposite side of the blade is set 1/32" lower to compensate for the whole of material removed in our example. By doing this you get a flat surface.

What size jointer is the biggest demand to sass when deciding which one to buy. A 6" jointer is the smallest jointer size that would probably be of any use if you plan on building furniture. The thing to think is what is the width of the boards that I ordinarily deal with when building projects. If you're like most 6" to 10" is normal. So lets go out and buy a 10" jointer, right? If you have the money the sass is Yes! Just perceive that for each 2" you go up in
capacity above 6" you growth the price of the jointer practically by (you may want to get a paper bag to breath in before you read on) 00.00!

So, buy the biggest one you can afford, 6 to 8" is what most end up going with just because of price. A good jointer will have a dead flat table top, a fence that slides categorically and have stops at 90 and 45 degrees, and have good dust control.

Drill Press: Sure a hand drill can bore a hole but a drill press can do it so that it's quadrate to an edge or covering or at literal, angles. Larger bits are better used in a drill press as well because you can turn the speed to a lower setting. You can also use a wider variety of accessories on a drill press like a hollow-chisel mortiser, a biscuit cutter, and even sand curved edges. Drill presses come in bench top models and floor models. Floor models will have a lot more capacity, but you may not need that. Even if you don't need the extra capacity, the versatility of the floor models make them entertaining to many woodworkers. A good drill press will have a table that's flat and quadrate to the chuck and be able to tilt to 45 degrees. It should have changeable speed and be able to accept 1/2" size drill bits.

Compound Miter Saw: A blend miter saw excels at cross cutting boards to length. Yes, a
table saw can also do this but is difficult with long boards. Also, with a fence setup on either side of a miter saw you can quickly, easily, and categorically cut boards to separate lengths all without a tape measurer. A miter saw also excels at mitering boards up to 45 degrees, and beveling boards. A Sliding blend miter saws can also growth the cutting capacity of a miter saw by any inches, so if you cut a lot of wide boards over 8" you may want to look into one of these. blend miter saws ordinarily come in 8", 10", and 12" sizes which refers
to the size blade it uses. simply the bigger the blade the wider boards it can cut.

A good blend miter saw will have a flat table that is perpendicular to the blade when set to 90 degrees and be adjustable for the times it might get out of square. It should have a degree scale that's easy to read and have stops at 90, 45, and 22.5 degrees. It should also be able to tilt to 45 degrees for cutting bevels and blend cuts.

Band saw: The band saw is arguably only second in versatility to the router in the woodshop. Here are just some of the things that the band saw can do: cut curves and circular parts, cut small logs into lumber, cut out round blanks for turning on the lathe, resaw thick planks into thinner book matched boards, and cut thin slices into veneers. In my view (and it's worth what you're paying for it) with this much versatility you want to buy a good saw, much like with the table saw, don't skimp here. Band saws are sized by the capacity between the blade and the back of the saw (refer to as the "throat"). So if a band saw is said to be 14" that means it can cut a board that's 14" without hitting the back of the saw. How thick a board you can cut is determined by the space between the table and the upper blade guide. If you plan on using your saw to resaw lumber then you need a larger capacity between the table and the upper guide. Some saws are able to have a "riser" added to them which can growth their resaw capacity from 6 to 12".

There are so many separate shapes and sizes out on the market now that it can be amazing in deciding which band saw to buy. My suggest is not to jump in and just buy one if you're new to
woodworking. resolve what you like to build first. This will resolve more than anyone what size saw to buy. If normal furniture is in your time to come my hint is to buy a 14" band saw. You can go back and add a 6" riser latter if you find you need the extra capacity. As I stated earlier, ask other woodworkers what they use, what do they like about it, what they don't, quest the archives of rec.woodworking to see what others say about a saw you're seeing at buying. By doing some explore up front you're more likely to have buyers remorse.

That's my list of indispensable stationary power tools. This is by no means an exhaustive list. But beginning out with these tools, along with our list of hand tools, and power hand tools, you're setting yourself up to be able to build practically anyone you like.

Setting Up Shop - Stationary Power Tools

Visit : home improvement Band Saws Woodworking Tools Collated Nails Air Tools

Tuesday, August 28, 2012

Band Saw Blade - Commercial Grade - 105" X 1/4" X 6 Skip Tpi

Best Price Band Saw Blade - Commercial Grade - 105" X 1/4" X 6 Skip Tpi


Band Saw Blade - Commercial Grade - 105" X 1/4" X 6 Skip Tpi Feature

  • Hard Tooth Rc 62-64 for cutting Hard/Soft Wood/Plastic/Metal with speed reduction
  • 105" length to fit 14" Delta, Jet, Grizzly, Reliant, General, Bridgewood, Ridgid, Craftsman.
  • 1/4" wide for general purpose cutting - minimum radius 5/8"
  • 6 teeth per inch for materials 1/2" or thicker
  • High Carbon steel for durability and long lasting edge retention

Band Saw Blade - Commercial Grade - 105" X 1/4" X 6 Skip Tpi Overview

Your 14" Delta/Jet/Grizzly, etal., band saw with Riser Block Extension deserves a high quality commercial grade (not hobby) band saw blade. High carbon steel permits tooth hardness of Rc 62-64 for cutting hard/soft wood, composition board, plastic and metal (mild steel/non-ferrous) with speed reduction. Milled,set and heat treated teeth provide more accurate, smoother cuts. This band saw blade is made for industrial applications, furniture-making, woodworking, DIY, and professional craftsmen.

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Aug 28, 2012 20:15:03

Recommend : Band Saws Woodworking Tools home improvement Refrigerators

Tuesday, August 14, 2012

effective Rocking Chair Woodworking Plans - building A splendid Rocking Chair

People who love to try their hand at building cool projects would find the building of a chair interesting. A Rocking chair fits well as an elegant piece of furniture on the porch or by the fireplace. A rocking chair provides oodles of relieve when you recline on it. Those who love to indulge in the hobby of manufacture new things by carving out exclusive pieces of wood, would be eager to know about the rocking chair woodworking plans.

While spellbinding in manufacture a chair with wood, the first thing that should be a part of the effective rocking chair woodworking plans is that you must use good potential wood. Pine is the most favored being lighter on the pocket and it is long-lasting also. If you are planning to make the chair for outdoor use, to withstand the weather or the environmental pressure, it is best to make a chair with a sturdy material like oak or you can use cedar. The endurance of a rocking chair depends on the kind of wood you use for constructing it.

Band Saws Woodworking Tools

When you start the building of a rocking chair, you need to visualize how a chair looks so that you move towards the right direction while building the rocking chair. Good chair woodworking plans will feature that the legs of the chair must be shorter to compensate the addition of the rockers. It is essential to make the rocker's back angled only slightly so that the someone sitting does not have the feeling that he might fall down any moment. Seat placement and the back angle are the two most prominent things that you need to think while indulging in the rocking chair building process.

effective Rocking Chair Woodworking Plans - building A splendid Rocking Chair

Best Price Kreg KMS7102 Table Saw Precision Miter Gauge System


Kreg KMS7102 Table Saw Precision Miter Gauge System Feature

  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
  • Vernier scale allows fast, 1/10th-degree angle adjustments
  • Microadjuster allows additional angle adjustment to 1/100th degree
  • Postive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty

Kreg KMS7102 Table Saw Precision Miter Gauge System Overview

Cut perfect miters consistently with Kregs Precision Miter Gauge System. A number of unique features makes this one of the most precise miter gauges on the market today. Factory calibrated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale enables precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the miter slot for a perfect fit. A 24" fence section with patented Swing Stop and self-adhesive measuring tape is included. Factory calibrated... perfect right out of the box

Kreg KMS7102 Table Saw Precision Miter Gauge System Specifications

We’ve found that even on high-end saws, the miter gauge is sometimes not the best it could be – a situation easily resolved by the folks at Kreg. You probably know them for their ingenious pocket hole system, but this miter gauge is worthy of fame in its own right.

It’s not like any we’ve seen before, with a handful of features that work together to give you the ability to set an angle cut accurately to 1/10th of a degree – and beyond that, to adjust to 1/100th of a degree (hats off to you if you’re that precise!)

Setup takes a little bit of time and patience, but the results are well worth it. It’s got a super accurate length scale with a magnifying lens cursor, similar to those on good table saws, and the curved flip stop can be used with the fence as is, or you and a pair of pliers can modify it easily for permanent use with a sacrificial fence. This clever curved design lets you slide your stock right under it. The slot bar has five patented nylon screws along its length that let you custom fit it to your table saw slot, completely eliminating any play.

It’s got the positive stops you expect, at 0, 22.5, 30 and 45 degrees, and they’re marked by preset holes that accept a tapered brass pin, which locks in the angle with absolute precision. The gauge is marked with diamonds every five degrees for great legibility, too. But what sets this gauge apart from the pack is its Vernier scale, allowing you to set any angle in tenth-of-a-degree increments. Unless you have a degree in mathematics, don’t try to understand the process – it’s confusing and non-intuitive. Instead, just follow the step-by-step directions, and you’ll get absolute accuracy every time.

And when Kreg calls something a "micro-adjustment" mechanism, they really mean micro. With this miter gauge, you can actually increase your angle by 1/100th of a degree by turning a nylon screw that increases the space between the fence and the gauge. For each .001 inch you put between the fence and gauge, you increase your angle by 1/100th of a degree.

Kreg’s really hit the accuracy bullseye with this miter gauge, and adding it to even a so-so saw will give you fantastic results. Take your time with setup and follow the directions for the Vernier scale, and you’ll be as taken with it as we are. -- Kris Jensen-Van Heste

Available at Amazon Check Price Now!

Related Products

Customer Reviews




*** Product Information and Prices Stored: Aug 14, 2012 18:15:06

You should use your judgment and your creative skills to gauge the length, the curve and the angles that you think should be incorporated in the institute of the rocking chair you are constructing. The chair woodworking plans that you come over on the web will offer you help in building a chair. Some of the tools required consist of a jigsaw, drill, sander, screwdriver, band saw, and t-square. However, it is very prominent to use your imaginative power, your sense of judgment to add that element of wholeness to your craft.

The challenge that you face is how you curve the wood for manufacture the rockers, how you take the measurements and cut out the pieces and join them. Your attempt will be rewarded when you are able to use your knowledge and your skills in the best possible way for manufacture a chair, and you will be very happy and proud when you see the chair that you made with your own hands after you find a perfect place for it in your house.

effective Rocking Chair Woodworking Plans - building A splendid Rocking Chair

Thanks To : Band Saws Woodworking Tools home improvement Flashlights Hand Tools